Penny Black Saturday challenge - midway reminder card

Hello friends; it's another busy day on my blog today as I have two cards to share with you. The first is my second card as guest designer for the Penny Black Saturday challenge. They have a midway reminder post and I was delighted to join in again.  The challenge is 'ATG' but has an optional twist of 'bright colours'.

For today's card I once again did not use a hedgie stamp but instead chose a very old girl stamp called 'sweet thing'.  I can't actually recall using this stamp but if I did it was a VERY long time ago.  I went with some pretty, girly papers and I think it turned out adorable.  I hope you like it too. 

Here is my card:

A closer look at the details:

Plus I decorated the inside:

I began by stamping the image onto a scrap of alcohol marker friendly card and coloured it with my Promarkers.  I added some white highlights and fussy cut it out.  I cut a white panel 4" x 5 1/4" and used left over pieces of patterned paper to create a fun layout.  I added the paper onto the white panel with liquid glue.  I die cut a stitched square from white card and added the image onto this with foam squares.  At this point I decided to cut out my background panel with a stitched rectangle so that it would match the image panel.  I added some scrap white card behind the square image panel and adhered it to my background with liquid glue.  I stamped the sentiment in black onto white card and used a stitched label die to cut it out.  I added this at the top of the panel with foam squares.  I die cut one flower from white card and added it in the top right of the square panel with liquid glue.  I finished off with some yellow pearls.  The panel was adhered to my card base using double sided tape.   For the inside I die cut another white panel with the stitched rectangle.  I used some of the left pieces of patterned paper and also cut them out using the stitched rectangle so that they would match the stitching.  I adhered the papers to the bottom of the panel with liquid glue and stamped my sentiment in the centre with black ink.  I also added one more flower over the patterned paper with liquid glue.  I adhered the panel to my card base using double sided tape. 

I would like to enter my card into the following challenges:

613 Avenue Create challenge - ATG optional twist think pink

Addicted to Stamps & More challenge - birthdays

Creative Friday challenge - faux stitching

Fab 'n' Funky challenge - 3 of something (3 papers, 3 pearls, 3 panels)

Farm Quest Grocery Game challenge - anything goes food or drink

I Love Promarkers challenge - your favourite colours or ATG (I love using all colours)

Paper Rocks Scissors challenge - use paper or scissors (I used both)

Sweet Stampin' challenge - cute creations 

Please pop over to the Penny Black Saturday challenge blog for all the details/rules and to see the amazing creations from the design team. I would once again like to thank Helen and the team for having me as a guest this month. I hope you will find the time to enter the challenge and cannot wait to see all your projects in the linky.

Thanks for stopping by and see you all soon.

Love and hugs,

card supplies:

Penny Black - sweet thing wood mounted stamp 

Promarkers

DCWV - nana's nursery baby girl 4 1/2" x 6 1/2" paper stack (retired)

Simon Says Stamp - stitched squares die set (no longer available)

Gina K Designs - master layouts 14 (for stitched rectangle and stitched label)

MFT - sweet birthday wishes stamp (for sentiments)

Spellbinders - be bold blooms die set (for flower)

Limetree Craft - 280gsm silky smooth white card (not available but other options are here and here)

Limetree Craft - 300gsm smooth white card (for card base)

Versafine Clair - nocturne ink pad

Memento - tuxedo black ink pad

Sakura - white no. 10 gelly roll pen

Little Things From Lucy's Cards - hand in hand sequins (store now closed)

Heffy Doodle - alcohol marker friendly card (store now closed)

I have Affiliate Links for the Gina K Designs store. If you are considering making a purchase I would appreciate you using my links as it will earn me a small commission at no extra cost to you. 

Thank you x

World Goat Day IG Hop 2026

Happy Friday friends; I hope you've had a great week.  I'm back today as we are celebrating World Goat Day with an Instagram Hop organised by my lovely friend Kelly.  We are excited to share our goat themed cards and projects with you and we hope you'll hop along with us, learn fun and fascinating facts and check out all the crafty creations.  

Goats are extremely intelligent and curious and are very often not given credit for being the smart and loving creatures they actually are.  Their inquisitive nature is exemplified in their constant desire to explore and investigate anything unfamiliar which they come across.  

I know it's hard to believe but I didn't have one goat stamp in my (vast) stash but luckily found one by Sugar Pea Designs on eBay.  It has adorable images and some very punny sentiments, which I love. I think my card turned out super cute and I hope you like it too.  

Here is my card:

A closer look at the details:

Plus I decorated the inside:

I began by stamping the images with memento ink onto alcohol marker friendly card and coloured them with Promarkers.  I don't have the dies so I fussy cut them out and added some white highlights.  I cut a piece of patterned paper to fit the front of my card base (4 1/4" x 5 1/2") and adhered it with double sided tape.  I die cut the decorative stitched rectangle and ink blended some blue and green ink to signify sky and grass; I also added some tufts of grass with a promarker.  I added the images with foam squares, except for the one tin can, which was added with liquid glue and stamped the sentiments with black ink.  I added some scrap white card behind the panel before adhering it to the background using double sided tape.  For the inside I die cut another decorative panel from white card and also used the same die to cut a small piece of the patterned paper, which I adhered to the bottom of the panel with liquid glue.  I added another image and tin can in the bottom left with liquid glue and stamped the sentiment in the centre with black ink.  The panel was then adhered to my card base with double sided tape.  

I would like to enter my card into the following challenges:

Crafty Animals challenge - ATG must include an animal

Creative Crafting Uncles challenge - ATG

Creative Moments challenge - make it cute

Daisy Chain challenge - animals

I Love Promarkers challenge - for the boys

Sisterhood of Snarky Stampers challenge - A is for animals

Unicorn challenge - layer it up

We Love Stamping challenge - summer blooms or ATG

We hope you will be inspired by our World Goat Day IG Hop and will pop over and check out all the gorgeous creations along the way.

Thanks for stopping by and take care. 

Lots of love,

card supplies:

Sugar Pea Designs - totes ma goat stamp (store now closed)

Spellbinders - playful stitched panels die set

Promarkers

DCWV - the natural matstack 8x8 pad (discontinued)

Sakura - white no. 10 gelly roll pen

Gina K Designs - ink pads - sea glass and grass green

Gina K Designs - detail craft scissors (for fussy cutting)

Limetree Craft - 280gsm silky smooth white card (not available but other options are here and here)

Limetree Craft - 300gsm smooth white card (for card base)

Versafine Clair - nocturne ink pad

Memento - tuxedo black ink pad

Heffy Doodle - alcohol marker friendly card (store now closed)

I have an Affiliate Link for the Gina K Designs store. If you are considering making a purchase I would appreciate you using my links as it will earn me a small commission at no extra cost to you. 

Thank you x

Krafty Chicks challenge #828 - Christmas

Good morning lovely friends, I appreciate you stopping by and I hope you're all doing ok. It's time for a new challenge over at Krafty Chicks challenge and this week we are on Week 2; as always the theme is 'Christmas' and I am your hostess. We are slowly adding to the Christmas pile, which really takes the stress off later in the year. We hope you will come over and join in the fun with us.

I recently bought some Penny Black wooden stamps from a friend who was de-stashing her craft room and had to use one of them on today's card (you know how much I love the PB hedgies!).  I was pushed for time when making my card so kept things very clean and simple, no dimension and it is a true SIP card this week. I think it turned super cute and I hope you like it too. 

Here is my card:

A closer look at the cute hedgie:

Plus I decorated the inside:

I began by cutting a white panel 4" x 5 1/4" from alcohol marker friendly card and stamped the image at the bottom.  I coloured the image with Promarkers and added some white gelly roll pen highlights. I stamped the sentiment in the upper left of the panel using black ink.  I added the panel onto a piece of red glitter card cut to 4 1/4" x 5 1/2" and then adhered it to my card base using double sided tape.  No dimension or embellishments but this makes it perfect for mailing!  For the inside I cut a white panel 3 3/4" x 5" and stamped the image in the bottom using black ink.  I stamped the sentiment in the centre and added the panel onto another red glitter card layer.  The panel was then adhered to the card base using double sided tape.  

I would like to enter my card into the following challenges:

613 Avenue Create challenge - ATG optional twist 'any holiday'

Craft Rocket challenge - animals

Crafty Animals challenge - ATG must include an animal

Creative Friday challenge - new (my stamp is new to me)

Critter Crazy challenge - ATG with a featured critter

Fab 'n' Funky challenge - Christmas in July 

Moving Along With The Times challenge - use a colouring medium (I used Promarkers)

Merry Little Christmas challenge - anything Christmas themed 

Peace on Earth Christmas challenge - anything Christmas themed

Pearly Sparkles challenge - Christmas in July

Penny Black Saturday challenge - ATG optional theme 'on the move'

Simple Clean & Simple challenge - ATG optional theme 'birthday'

Simon Says Stamp Wednesday challenge - 4 legged friends

Sweet Stampin' challenge - Christmas in July

The Dream Factory challenge - inspired by the Cleaner - CAS cards

Triple B challenge - birds, blooms or butterflies (hope my little robin is ok)

Try It On Tuesday challenge - animals: real or imaginary 

I hope you will be able to join us for our 'Christmas' challenge and I cannot wait to see your creations in our linky. Please leave some love for my fellow chicks - Leanne, Diane and Lori. 

Thank you so much for stopping by; I appreciate your lovely comments.

Love and hugs,

card supplies:

Penny Black - wishes for kisses 1505H wooden stamp

Uniko - rustic Christmas stamp (for sentiments)

DCWV - holiday collection glitter mat stack 

Promarkers

Sakura - white no. 10 gelly roll pen

Sakura - black ballsign glaze pen (to darken eyes and nose)

Limetree Craft - 300gsm smooth white card (for card base)

Versafine Clair - nocturne ink pad

Memento - tuxedo black ink pad

Heffy Doodle - alcohol marker friendly card (store now closed)

Patterned Paper IG Hop - June 26

Hello friends, welcome back to my little blog. I'm here today to share my card for this month's Patterned Paper Party Instagram Hop. Do you love patterned paper? Do you have a huge stash that needs using? Well so do we and it's time to get it used! We will be hopping on the 20th of each month to share our ideas. We will definitely be creating cards, but maybe sometimes tags, ATCs, gift bags/boxes, mini albums and scrapbook pages too. We want our patterned paper to be used.

The theme is always 'anything goes' but each month we will have an optional twist that can be used if you like; this month the twist is 'chevrons' which are so fun, especially for masculine cards. I made a Father's Day card for my FIL and it's 5" x 7" in size.  Surprisingly I didn't use chevron patterned paper but instead die cut some chevrons from patterned paper for my background.  I hope you like it.

Here is my card:

A closer look at the image:

Plus I decorated the inside:

I began by stamping the image onto alcohol marker card, coloured it with Promarkers and fussy cut it out.  I did add some white highlights with a gelly roll pen too.  I found this fun paper pad from DCWV and although it's hard to tell in the photo but the orange/bronze stripe has some foiling detail.  All the papers are from the pad including the brown mat layers and the chevrons were cut from it too.  I cut the main panel 4 1/4" x 6 1/4" and matted it onto the brown layer with double sided tape.  I cut a white panel 3 1/2" x 2 7/8" and again matted it onto a brown layer; I also added some thin cream strips of paper to the top and bottom of the white panel with liquid glue.  I added the image onto the white panel with foam squares.  I stamped the sentiment onto the cream paper with brown ink and die cut the DAD letters from the brown paper and stacked them x3 with liquid glue; the letters were then adhered to a cream piece with liquid glue.  I cut 4 x chevrons for my background and adhered them with liquid glue.  The image panel was added to the centre of the panel with double sided tape and the sentiments were added to the top right and bottom left with double sided tape.  For the inside I cut a white panel 4 3/8" x 6 3/8" and stamped the sentiment in the centre with brown ink.  I cut some of the papers and layered them together with double sided tape and also cut another chevron and placed that across the centre with liquid glue.  the panel was then adhered to the card base with double sided tape (oops I forgot my brown layer but it still looks ok I think). 

I would like to enter my card into the following challenges:

* to be updated *

We hope you will be inspired by our Patterned Paper Party IG Hop and will pop over and check out all the gorgeous creations along the way. If you would like to join us please visit my Instagram page or use the hashtag #patternedpaperpartyhopjune2026 and we will find you.

Thanks for stopping by and take care.

Lots of love

card supplies:

LOTV - vintage boys - mr fixit A5 polymer stamps (available in digi only now)

MFT - stepped up chevon die

MFT - little letters die set

Woodware - one for the boys stamp (for inside sentiment although I did some stamp surgery to remove the happy birthday)

DCWV - the natural stack 8" x 8" pad

Promarkers

Heffy Doodle - alcohol marker friendly card (store now closed)

Limetree Craft - 280gsm silky smooth white card (not available but other options are here and here)

Sakura - white no. 10 gelly roll pen

*Gina K Designs - dark chocolate ink pad

*I now have an Affiliate Link for the Gina K Designs store. If you are considering making a purchase I would appreciate you using my link as it will earn me a small commission at no extra cost to you. Thank you x

CASE IT IG Hop - February 26

Hello again friends. I hope you've had a great start to your Saturday; it's actually been sunny here today but I think it's just a blip and we will be back to rain tomorrow lol!  I'm back to share this month's card for the CASE IT Instagram Hop where we find a project on Instagram that inspires us and we will share that project as well as the project we’ve created. There are so many beautiful creations on Instagram the only difficult part is narrowing down which one to CASE (which means Copy And Share Everything).

This month I was inspired by Stacey (@StaceysCreativeCorner over on IG); her cards are super cute and this one instantly called to me - a cute image, kraft and pretty papers. I don't have any baby cards in my stash so I changed it from Valentine's to new baby.  Here is her card for my inspiration:

Isn't Stacey's card just so adorable? I kept the scalloped layers but I went with white instead of kraft and my layout is vertical instead of horizontal although I think you can still see how I was inspired by Stacey's card! I hope you like it.

Here is my card:

a closer look at the details:

Plus I decorated the inside:

I began by stamping the cute llama onto alcohol marker friendly card, coloured it with Promarkers and used the coordinating die to cut it out.  I die cut the scallop layer and a stitched layer from white card and adhered them together with double sided tape.  I cut three strips of patterned paper (not sure if you can tell but two of them have glittery highlights running through them) and adhered them onto the stitched panel with double sided tape.  I die cut a circle from vellum and adhered the llama on top with foam squares.  I stamped and white heat embossed the sentiment directly onto the vellum but it looked a little lost so I re-stamped it onto white card using sea glass ink and used a sentiments strips die to cut it out.  I then added this over the embossed sentiment with foam squares.  I added foam squares behind the vellum and adhered it onto the background in the bottom right.  I finished off with some mint sequins and also added some glitter accents to the centre so that they would match the papers.  I added some scrap white card behind the panel and then adhered it to my card base with double sided tape.  For the inside I cut the same white layers, cut some small pieces of the papers and added them to the bottom of the panel with liquid glue.  I masked the papers and stamped the llama peeking over the top and stamped a sentiment in the centre with black ink.  I adhered the panel to the card base with double sided tape.  

I would like to enter my card into the following challenges:

* to be updated * 

We hope you will be inspired by our CASE IT Instagram Hop and will pop over and check out all the gorgeous cards along the way. If you would like to join us please visit my Instagram page or use the hashtag #caseithop and we will find you.

Thanks for stopping by and enjoy the rest of your weekend.

Lots of love

card supplies:

Taylored Expressions - llama love stamp & die - retired

Promarkers

MFT - blueprints 27 die set (for scalloped die)

MFT - itty bitty baby stamp (for sentiments)

DCWV - nana's nursery baby boy paper pad - discontinued

Spellbinders - fluted classic circles (for circle die)

*Gina K Designs - ML 14 (for stitched rectangle die)

Gina K Designs - sentiment strips dies

Gina K Designs - sea glass ink pad (for sentiment)

Studio Katia - magic mint sequins

Tonic - nuvo glitter accents - fresh snowfall

Limetree Craft - 280gsm silky smooth white card (not available but other options are here and here)

Versafine Clair - nocturne ink pad

Memento - tuxedo black ink pad

Stampin' Up! - card stock vellum - retired 

Heffy Doodle - alcohol marker friendly card - store now closed

*I now have an Affiliate Link for the Gina K Designs store. If you are considering making a purchase I would appreciate you using my link as it will earn me a small commission at no extra cost to you. 

Thank you x

AAA Birthday challenge #80 - box card

Good morning lovely friends and welcome to the last month of 2025!  I can't believe it's already December 1st - where did November go?   As it's the first of the month it means we have a brand new challenge over at AAA Birthday. This month's theme is 'box card' which may sound intimidating but there are lots of tutorials out there to follow (there are links over on the challenge blog if you want check them out).  Our guest designer again this month is the talented Sigrid so please pop over to her blog and leave her some love.

To create my box card I used a die set from Studio Light, which I have used once before to make a birthday box card for our cat Willow, which you can see here.  This time around I simply used all the dies in the set to create my card and I think it turned out so pretty and girly.  I hope you like it.   There are a few more photos today as I tried to get as many good views of the project as possible!

Here is my box card:

Plus I added a white panel on the back to write my message:

To create the box you need to die cut two of the pieces and adhere them together to make the box shape so I began by die cutting two of them from black card.  I adhered them together with strong red line tape so I know they would stay secure.  I also cut three of the supports for the inside of the box from black card.  I used a very old but a really pretty paper pad to cut the layers (the stripe paper has glitter running through it and looks beautiful in real life) and cut the back panel from white card and stamped a sentiment in the centre with black ink.   I then added them to the box with liquid glue. As I said I decided to stick with just the dies in the set so cut the butterflies from pink and orange scrap card (to match the papers) and also cut some leaves from paper from the pad.  I also die cut the grass from two different colours of green card from my scraps bin.  I stamped the happy birthday sentiment onto white card and used the decorative label die to cut it out; I also cut the layer from black card.  I adhered them together with liquid glue.  It was now time to decorate the box.  I adhered the grass to the inside supports with liquid glue and then added them into the box with more of the red line tape.  I adhered two of the smaller butterflies directly to the grass and box with liquid glue but the others had a tiny piece of acetate stuck to the backs with double sided tape so that they look like they are flying above the grass.  I did cover the backs with another butterfly to hide the tape.  These three butterflies were then adhered to the supports with red line tape.  I adhered two more of the butterflies to the side flaps with foam squares and the sentiment to the front also with foam squares.  I added two leaves behind the sentiment label (but not sure if I like them now lol!) and finished off with some black pearls in the centres of each of the butterflies.  I also added a butterfly to the white panel on the back.  At the last moment I decided to cut two banners, one from orange and one from pink card for the back flap; I adhered the orange one with liquid glue and the pink one with foam squares.  A really sweet box card and the added bonus is that is folds flat and will fit in an A2 envelope.  

I would like to enter my card into the following challenges:

A Cut Above challenge - ATG with a die cut

Creative Creases challenge - ATG with a fun fold

Creative Friday challenge - ATG

Cut It Up challenge - fun fold + use a die cut

Girlz Rebel challenge - something beginning with B (butterflies/box card)

Little Red Wagon challenge - pearls & sequins & gems, oh my

Simon Says Stamp Monday challenge - use dies in Diecember

Simon Says Stamp Wednesday challenge - ATG

Tic Tac Toe challenge - shaped card, free, foliage

The Design Team have created amazing cards as always so please pop over to the blog and check them out and perhaps leave them some love on their personal blogs. I hope you will be able to join in with the challenge this month but don't forget it has to be birthday themed. I can't wait to see your creations in the linky.

Have a great day.

Love and hugs,

box card supplies:

Studio Light - exploding box die set (SL-ES-CD116)

MFT - sweet 16 stamp (for happy birthday sentiment)

DCWV - Nana's nursery - baby girl 4 1/2" x 6 1/2" paper pad

Limetree Craft - 220gsm black card

Versafine Clair - nocturne ink pad

Gina K Designs - on the inside stamp set (for sentiment on the back)

Gina K Designs - mini pearl mix - black, gold & silver

coloured card from scraps bin

acetate from stash

* I now have an Affiliate Link for the Gina K Designs store. If you are considering making a purchase I would appreciate you using my link as it will earn me a small commission at no extra cost to you. 

Thank you x